Basic control is a feature that enables traffic control by registering a single URL to a segment.
Create a basic control segment to prevent service overload caused by traffic spikes.
Add a new Basic Control segment
Step 0. Click the "Add" button in the right sidebar.
Step 1. Enter a segment name.
- It should be distinctive enough to identify among other segments.
Step 2. Enter the URL that you wish to control traffic for.
- It is optional to include the protocol (e.g. https://).
Step 3. Enter the number of Limited inflow.
- Segment type : Select the type of traffic control for setting the limited inflow
- Static : Controls traffic based on the set limited inflow.
- Dynamic : Set the Max. and min. limited inflow and processing time (s).
-
- In the dynamic type, limited inflow is automatically applied depending on the processing time.
-
Step 4. Select the waiting room template.
- In free trial plan, You can use only default waiting room.
Step 5. Advanced Settings (Optional)
-
- Re-request intervals(s) : You can manually set the interval for validating visitors.
- The system will dynamically adjust the interval to align with the specified minimum and maximum values.
- If the number of visitors is lower than your plan's limit, the interval will be shorter. As the number of visitors increases, the re-request interval will increase, up to the maximum value.
- Timeout (s) : Set the validity time of the Inflow key issued after waiting is complete.
- Default : Validate the entry identification key within the specified minimum and maximum validity time.
- Manual Setup: Set the minimum and maximum validity time arbitrarily to validate the entry identification key within this interval.
- Re-request intervals(s) : You can manually set the interval for validating visitors.
Step 6. Assign an operator (optional)
- If there is an operator responsible for managing each segment, find and assign an operator.
- Invite Admin or Operator is available starting with an Enterprise Plan subscription.
Step 7. Click the 'Confirm' button to complete creating a segment.
Edit and remove the Basic Control Segment
You can edit the segment by clicking 'Settings' button in each segment.
If you want to remove the segment, click 'Trash icon' button.
Be aware that you are not allowed to restore the segment after removing it.
Comments
0 comments
Please sign in to leave a comment.